GYEON Q2 Pure

The original first single-layer quartz coating system of Gyeon Q2 Prime Quartz Coating has been updated with an improved formula – Gyeon Q2 Pure Quartz Coating. Gyeon Q2 Pure Quartz Coating combines the two most basic qualities of a single coating – high gloss and durability. This updated ceramic provides an even better glossy surface and hydrophobic properties, as well as the ability to apply a thick protective layer with incredible ease of application. Gyeon Q2 Pure Quartz Coating shows one of the highest levels of hydrophobicity among quartz coatings available to mass consumers – 100 degrees angle. Its hardness of 9H is also impressive and inherent only to high-end coatings. In the luxurious packaging of Gyeon Q2 Pure Quartz Coating, in addition to the coating, you will find an applicator, wipes, capometer and Gyeon Q2M Cure. Consumption rate: 30ml/car Hardness: 9H Water repellency angle: > 110′ pH: 2-11 Thickness: 0.2 – 0.5qm Durability: >18 months/30,000km. How to Use: 1. Polish the car to perfection and degrease it. 2. Place the cloth on the applicator and drip Gyeon Q2 Pure Quartz Coating. 3. Spread with horizontal and vertical movements, working on a single detail. 4. Let it dry for 20-30 seconds. 5. Wipe with a microfiber cloth. 6. Apply Gyeon Q²M CURE at least 1 hour after applying the base coat. In the next 3-4 days, it is advisable not to wash your car. Every 3-4 details, the cloth placed on the applicator is replaced with a new one. Due to the rapid hardening of Gyeon Q2 Pure Quartz Coating, it is recommended that large details such as the hood or ceiling be treated in two or more parts. Keep the room temperature between 15 and 25 degrees.